السيرة الذاتية

الشبكات الاجتماعية

المؤهلات

الدكتوراه

1424

الهندسة الميكانيكية

جامعة سالفورد المملكة المتحدة | بريطانيا

الماجستير

1419

‏الهندسة الميكانيكية

جامعة الملك عبدالعزيز بجدة | المملكة العربية السعودية

البكالوريوس

1413

الهندسة الميكانيكية

جامعة الملك عبدالعزيز | المملكة العربية السعودية

الأبحاث العلمية

Zone-Wise Uncertainty Propagation and Dimensional Stability Assessment in CNC-Turned Components Using Manual and Automated Metrology Systems

2025

مقال في مجلة | MDPI | Mashines

أكثر

Dimensional Accuracy and Measurement Variability in CNC-Turned Parts Using Digital Vernier Calipers and Coordinate Measuring Machines Across Five Materials

2025

مقال في مجلة | MDPI | Materials

أكثر

Flow induced noise and vibration in axial fan: a case study

2024

مقال في مجلة | Umm Al-Qura University | J. Umm Al-Qura Univ. Eng.Archit.

أكثر

Vibration and aeroacoustic analysis of defective cooling fans: effects of blade faults on noise, turbulence, and performance efficiency

2025

مقال في مجلة | Umm Al-Qura University | J. Umm Al-Qura Univ. Eng.Archit.

أكثر

Mechanical Reverse Engineering Approach for Precise Measurements of Reproducing Disc CAM

2018

مقال في مجلة | Science Publishing Corporation | International Journal of Engineering & Technology

Experimental Characterization of the Influence of Nozzle Temperature in FDM 3D Printed Pure PLA and Advanced PLA+

2020

مقال في مجلة | SciEP | American Journal of Mechanical Engineering

Influence of Multi-Level Printing Process Parameters on 3D Printed Parts in Fused Deposition Molding of Poly(lactic) Acid Plus: A Comprehensive Investigation

2020

مقال في مجلة | SciEP | American Journal of Mechanical Engineering

From 3D models to FDM 3D prints: experimental study of chemical treatment to reduce stairs-stepping of semi-sphere profile

2019

مقال في مجلة | ِAIMS | AIMS Materials Science

أكثر

Design of 100MW Solar PV on-Grid Connected Power Plant Using (PVsyst) in Umm Al-Qura University

2019

مقال في مجلة | IJSR | International Journal of Science and Research (IJ

Finite Element Modeling of a Cantilever for Counteracting Vibration Induced Deflection

2019

مقال في مجلة | The International Journals of Engineering and Sciences (IJENS) | IJMME: International Journal of Mechanical and Mechatronics Engineering

ON THE CORRELATION OF BOTH VIBRATION AND CUTTING FORCES WITH THE ROUGHNESS OF THE WORKPIECE MACHINED SURFACE DURING TURNING

2020

مقال في مجلة | Science and Engineering Research Support Society | International Journal of Advanced Science and Technology

Cooling Fan Fault Diagnostics Using Vibrational and Acoustical Analyses

2020

مقال في مجلة | Science and Engineering Research Support Society | International Journal of Advanced Science and Technology

Influence of Infill density and Orientation on the Mechanical Response of PLA+ Specimens Produced using FDM 3D Printing

2021

مقال في مجلة | Science and Engineering Research Support Society | International Journal of Advanced Science and Technology

The influence of the static-pre-stress and mechanical damage variable in the thermal quality factor of two-temperature viscothermoelastic resonators

2020

مقال في مجلة | SAGE Publications Inc | Advances in Mechanical Engineering

أكثر

موقع حكومي رسمي تابع لحكومة المملكة العربية السعودية

روابط المواقع الالكترونية الرسمية السعودية تنتهي بـ edu.sa

المواقع الالكترونية الحكومية تستخدم بروتوكول HTTPS للتشفير و الأمان.

مرحباً بك

تسجيل الدخول باستخدام النفاذ الوطني الموحد

المؤهلات

الدكتوراه

الماجستير

البكالوريوس

الأبحاث العلمية

Zone-Wise Uncertainty Propagation and Dimensional Stability Assessment in CNC-Turned Components Using Manual and Automated Metrology Systems

Dimensional Accuracy and Measurement Variability in CNC-Turned Parts Using Digital Vernier Calipers and Coordinate Measuring Machines Across Five Materials

Flow induced noise and vibration in axial fan: a case study

Vibration and aeroacoustic analysis of defective cooling fans: effects of blade faults on noise, turbulence, and performance efficiency

Mechanical Reverse Engineering Approach for Precise Measurements of Reproducing Disc CAM

Experimental Characterization of the Influence of Nozzle Temperature in FDM 3D Printed Pure PLA and Advanced PLA+

Influence of Multi-Level Printing Process Parameters on 3D Printed Parts in Fused Deposition Molding of Poly(lactic) Acid Plus: A Comprehensive Investigation

From 3D models to FDM 3D prints: experimental study of chemical treatment to reduce stairs-stepping of semi-sphere profile

Design of 100MW Solar PV on-Grid Connected Power Plant Using (PVsyst) in Umm Al-Qura University

Finite Element Modeling of a Cantilever for Counteracting Vibration Induced Deflection

ON THE CORRELATION OF BOTH VIBRATION AND CUTTING FORCES WITH THE ROUGHNESS OF THE WORKPIECE MACHINED SURFACE DURING TURNING

Cooling Fan Fault Diagnostics Using Vibrational and Acoustical Analyses

Influence of Infill density and Orientation on the Mechanical Response of PLA+ Specimens Produced using FDM 3D Printing

The influence of the static-pre-stress and mechanical damage variable in the thermal quality factor of two-temperature viscothermoelastic resonators

الكتب

المرجع في الورش الهندسية

البحث في الموقع