Umm Al-Qura University
- Ahmed Hassan Ahmed Backar
Mechanical Engineering Department
College of Engineering and Architecture
Advanced Prediction and Analysis of Delamination Failure in Graphite-Reinforced Epoxy Composites Using VCCT-Based Finite Element Modelling Techniques
MDPI, Polymers, 2025
Stress Analysis Mapping for Mechanically Fastened Composite Bolted Lap Joints Using Cohesive Zone Model
ASM International, Journal of Failure Analysis and Prevention, 2024
Mechanical Properties and Fracture Toughness Prediction of Ductile Cast Iron under Thermomechanical Treatment
MDPI, Metals, 2024
Failure analysis of gas turbine in first stage turbine blades in an urban power plant
ِEXTRICA, JOURNAL OF ENGINEERING AND THERMAL SCIENCES, 2024
Parametric Analysis on the Erosion and Corrosion Behavior of GRP's Hybrid Composite Pipes Used for the Transport of Petroleum Waste-water
SciEP, American Journal of Mechanical Engineering, 2023
A Review on Failure Analysis of Date Palm Fiber Reinforced Polymer Composites
SVU, International Journal of Engineering Sciences and Applications, 2023
Graphite-TiO2-doped coated sand granules for efficient continuous removal of methylene blue dye: Combining adsorption and photocatalytic degradation
ScienceDirect, Results in Engineering, 2023
Characteristic Properties of Date-Palm Fibre/Sheep Wool Reinforced Polyester Composites
ScienceDirect, Journal of Bioresources and Bioproducts, 2023
Experimental Evaluation of Mechanical and Tribological Properties of Segregated Al-Mg-Si Alloy Filled with Alumina and Silicon Carbide through Different Types of Casting Molds
MDPI, Metals, 2023
Assessment of the Wear Behavior and Surface Roughness of Epoxy / Date Seed's Powder Bio-composites
Science and Education Publishing, American Journal of Mechanical Engineering, 2022
The Effect of Fin Orientation on Thermal Fin Performance by Natural Convections: An Experimental Investigation
IJERA, International Journal of Engineering Research and Applications, 2022
Investigation of Erosion/Corrosion Behavior of GRP under Harsh Operating Conditions
MDPI, Polymers, 2022
Finite Element Modelling of Wear Behaviors of Composite Laminated Structure
MDPI, Lubricants, 2022
Tensile and Impact Properties of Hybrid Date Palm Fibre Composite Structures Embedded with Chopped Rubber
ijera, International Journal of Engineering Research and Applications, 2022
Finite Elements Modelling of Friction Stir Welding
SERSC, International Journal of Advanced Science and Technology, 2020
Influence of Infill density and Orientation on the Mechanical Response of PLA+ Specimens Produced using FDM 3D Printing
SERSC, International Journal of Advanced Science and Technology, 2020
Geotechnical Hazards and Environmental Changes Threatening the Sphinx Avenue and the Project of Luxor; Open Museum
Horizon Research Publishing Corporation, Civil Engineering and Architecture, 2021
CAD Design of Arcan Fixture and Finite element Simulation Based on Stress Analysis for Optimum Shear Mode
JMERD, Journal of Mechanical Engineering Research and Developments, 2021
Optimization of Friction Stir Welding Parameters of Al A9 1050-O with Respect to Weld Tensile Strength and Soundness
SERSC, International Journal of Advanced Science and Technology, 2020
Finite Element Modeling of a Cantilever for Counteracting Vibration Induced Deflection
IJENS, International Journal of Mechanical & Mechatronics Engineering, 2019
Cyclic Relaxation, Impact Properties and Fracture Toughness of Carbon and Glass Fiber Reinforced Composite Laminates
MDPI, Materials, 2021
